CJE-12/220
Uploaded at: September 7th, 2021- An overview
- CJE series miniature yoke detector, is to use the yoke to magnetization of ferromagnetic material artifacts of portable mini magnetic powder flaw detection equipment, to various parts of magnetization, suitable for oil field parts, coal, machinery, shipbuilding, internal combustion engine, standard parts, oil pump, nozzle, aircraft manufacturing, auto parts, chemical industry, boiler, pressure vessel, to build a bridge, railway and other industries products, caused by forging, quenching, welding, and fatigue of surface and near surface defects, such as chain rod, crankshaft, bearing, high strength bolt, spring, forgings, petrochemical pipe fittings, valves, blades, gears, roll, cable and the weld geometry of complex workpiece inspection.
- CJE series miniature magnetic yoke flaw detector has ac, dc, ac/dc magnetic powder flaw detector, dc power supply for the rechargeable battery, suitable for field without power supply site operation and high pressure could not enter the container, Bridges, pipelines and other site operation, a charge can be more than 6 hours continuous working time. Ac power supply with ~ 220 v power input directly, without other instruments form a complete set, convenient operation, simple, light weight, easy to carry, so the equipment is widely used.
- Second, the technical parameters
- Type no.
- Class CJE – 12/220
- Ac/dc
- V50hz electric source ~ 220
- – 12 v
- Charging power source 220 v, 50 hz
- Using electric pool MF12-7.2 AH
- Electric current AC1.4 A work
- DC1.7 a.
- When charging between 8 ~ 15 h
- Battery using time more than 6 hours
- 1 minute on 1 minute off work time
- Magnetic pole pitch 50 ~ 200 mm
- Lift A C > 5.5 kg
- D C > 22 kg
- Agent head weight 3.1 kg
- Battery pack 2.9 kg
- shape
- Size (mm) head 52 x 208 x 208
- Battery pack 160 * 70 * 70
- The charger 50 x 75 x 40
- 3. Complete sets of instruments, sex
- Type no.
- Class CJE – 12/220
- Ac/dc
- Leaning head 1
- Electricity pool package 1 only
- Electricity pool 1 only
- Electrical source line 1 root
- Ring around the line 1 root
- 1 instruction manual
- And 1 case the
- Warranty repair 1 card
- Bag pack box 1 only
- Four, use, operation and matters needing attention
- 1, before the use should add a small amount of lubricating oil in the live joint pin parts.
- 2, magnetic pole probe head should keep good contact with the workpiece rear can push switch, sensor before leaving the artifacts should be timely release the switch. In order to avoid improper operation instrument thermal damage failure.
- Fifth, deficiency of charging methods and judgment
- 1, connect the charger (adapter) and battery, charger (adapter) inserts the 220 v power socket, plug on the charger the red light flashing, for the red light turns green when said end of charging, charging time is about 12 hours.
- 2, when the power is in the use of battery box, lifting force significantly decreased or specimens shows that the effect not beautiful, should be added charging, charging time is about 12 hours.
- 3, 1/0 switch function: 0 for the use of 220 v power supply, 1 block for the use of 12 v dc power supply.
1294
QTY:
Read more