WHY CALIBRATE?
Correct and reliable measurements are the prerequisites for any high-quality industrial production. Measuring and testing equipment is used, among other things, for the quantitative determination of properties as well as for controlling, regulating and automating production.
All equipment used for measurements, including equipment for auxiliary measurements, e.g. for ambient conditions, and having a significant influence on the accuracy and validity of the result of the test or sampling, must be calibrated before it is put into operation.
Therefore, Enjaz Albasra will provide the services below among others, as:
Temperature calibration service
The temperature laboratory is accredited for temperatures from -30 °C to 1300 °C. Thermocouples, indicating temperature measuring and test instruments, as well as temperature block calibrators can be calibrated within this measuring range. Resistance thermometers can be calibrated between -30 °C and 960 °C. The basis of each calibration is the international temperature scale of “ITS-90”.
Measurements are executed in accordance with calibration guidelines of international codes will ensures the best possible determination of the temperature characteristic curve. If desired, other temperature values (e.g. from real operational areas) can be included in the calibration.
Please get in touch with us if you have any other questions about our calibration service.
For fast handling of your calibration and maintenance orders, please use our product return procedure.
Pressure calibration service
The calibration laboratory for “absolute pressure and positive overpressure” allows the calibration of analogue and digital pressure measuring devices and pressure sensors with an electrical output signal (e. g. 0…10 V, 4…20 mA, …).
Calibration is carried out as a comparison measurement against a dead weight tester utilized as the reference standard. The dead weight tester is used to pressurize the instrument under test with a defined pressure from 1…1200 bar. Depending on the actual measuring range, the smallest possible measuring uncertainties are 0.7 mbar.
Please get in touch with us if you have any other questions about our calibration service.
For fast handling of your calibration and maintenance orders, please use our product return procedure.
Electric values calibration service
Resistors and ohmmeters can be calibrated from 0 to 2 kΩ. Depending on the resistance value, the smallest possible measuring uncertainty is 0.1 mΩ. DC voltmeters and transmitters can be calibrated between 0 and 20 VDC with a smallest possible measuring uncertainty of 2 μV. DC testing and measuring devices for standard signals (0)4…20 mA can be calibrated with a smallest possible measuring uncertainty of 0.05 μA.
Please get in touch with us if you have any other questions about our calibration service.
For fast handling of your calibration and maintenance orders, please use our product return procedure.